Husqvarna 96061026100 960 61 02-61 Parts Manual
![Husqvarna 96061026100 960 61 02-61 Lawn Mower manual cover](/images/wjwVLKYgVQlryfPltYvAOJhF/thumbs/thumb175x175.webp)
To start the Husqvarna 96061026100 Lawn Mower, ensure the fuel tank is filled and the oil level is adequate. Set the choke to the 'Start' position if the engine is cold. Pull the starter cord briskly until the engine starts, then move the choke to 'Run'.
Use SAE 30 oil for temperatures above 32°F and SAE 5W-30 for temperatures below 32°F. Always check the owner's manual for specific recommendations.
The air filter should be checked before each mowing session and replaced every 25 hours of operation or at least once a season, whichever comes first.
Check the fuel level, ensure the spark plug is clean and properly connected, and verify that the air filter is not clogged. Also, make sure the safety features are engaged correctly.
Disconnect the spark plug wire for safety. Tilt the mower to access the blade. Use a wrench to remove the blade bolt. Replace with a new blade and tighten the bolt securely.
Regular maintenance includes checking the oil level before each use, cleaning the mower deck, inspecting the blades, and servicing the air filter and spark plug every season.
Ensure the blades are sharp and clean. Adjust the cutting height to suit grass conditions, and mow at regular intervals to prevent overgrowth.
Wear appropriate safety gear, such as gloves and eye protection. Clear the lawn of debris before mowing, and never refuel the mower while the engine is hot.
Clean the mower thoroughly, empty the fuel tank or add a stabilizer, and store it in a dry, cool place. Disconnect the spark plug wire to prevent accidental starting.
Check for debris lodged in the cutting area, inspect the blade for damage or imbalance, and ensure all bolts are tightened properly.