Husqvarna 96051013100 Parts Manual
![Husqvarna 96051013100 Lawn Mower manual cover](/images/jAFoPWxshyBXKKTUySAsuVrQ/thumbs/thumb175x175.webp)
To start the Husqvarna 96051013100 Lawn Mower, ensure the fuel tank is filled, the spark plug is connected, and the throttle lever is in the start position. Pull the starter rope briskly until the engine starts.
Check if the mower deck is level. You can adjust the deck height using the adjustment levers on each wheel. Also, ensure the blades are sharp and not damaged.
Routine maintenance includes changing the oil, cleaning the air filter, checking the spark plug, and inspecting the blades for wear. Refer to the user manual for detailed instructions.
Engine stalling can be caused by a clogged air filter, old fuel, or a dirty carburetor. Clean or replace the air filter and use fresh fuel. If the problem persists, clean the carburetor.
Disconnect the spark plug wire for safety, then tip the mower on its side. Use a wrench to remove the blade bolt and replace the blade. Ensure the blade is installed correctly and tightly secured.
Use SAE 30 oil for temperatures above 32°F and SAE 5W-30 for temperatures below 32°F. Always check the owner's manual for manufacturer's recommendations.
Excessive vibration can be due to an unbalanced blade, loose components, or debris caught under the deck. Check and tighten all bolts and clean the underside of the mower.
Before storing, disconnect the spark plug, drain the fuel tank, clean the mower thoroughly, and apply a light coating of oil to prevent rust. Store in a dry place.
Check the drive belt for wear or damage. Ensure the wheels are not obstructed by debris. If the problem persists, inspect the transmission for issues.
Ensure there is fresh fuel in the tank and the spark plug is functioning. Check the air filter for blockages and ensure the carburetor is clean.