Husqvarna 96051000703 Parts Manual
![Husqvarna 96051000703 Lawn Mower manual cover](/images/bkGCmBpEhOGEcnRhveDykZWm/thumbs/thumb175x175.webp)
To start the Husqvarna 96051000703 Lawn Mower, ensure the fuel tank is filled, the oil level is adequate, and the spark plug is connected. Then, engage the parking brake, set the throttle to the choke position, and turn the ignition key to the start position.
If the mower does not start, check the fuel level, ensure the spark plug is clean and properly connected, and verify that the battery is charged. Additionally, make sure the parking brake is engaged and the blades are not engaged.
Change the oil after the first 5 hours of use and then every 50 hours of operation or once a season. Always use high-quality oil recommended by Husqvarna.
Use fresh, unleaded gasoline with an octane rating of 87 or higher. Avoid using ethanol blends greater than 10% to prevent engine damage.
Ensure the mower is off and the spark plug is disconnected. Tilt the mower to access the blade, use a wrench to remove the blade bolt, replace with a new blade, and tighten the bolt securely. Reconnect the spark plug before use.
Ensure the blades are sharp and not damaged. Check the mower deck for debris build-up and ensure the cutting height is set appropriately for the grass conditions.
Disconnect the spark plug, tilt the mower and use a hose to remove grass clippings and debris. For stubborn build-up, use a brush or scraper. Dry the deck thoroughly to prevent rust.
Regular maintenance includes checking and replacing the oil, cleaning or replacing the air filter, sharpening or replacing blades, checking tire pressure, and cleaning the mower after each use.
Check the tire pressure and ensure they are evenly inflated. Inspect the blades for sharpness and balance. Adjust the cutting height settings to ensure even mowing.
It is not recommended to mow wet grass as it can lead to uneven cuts, clog the mower deck, and increase the risk of slipping. Wait for the grass to dry for best results.