Husqvarna 96041024600 Parts Manual

To start the Husqvarna 96041024600, ensure the fuel tank is filled, engage the parking brake, shift the gear to neutral, and pull the starting cord or turn the ignition key.
Use unleaded gasoline with a minimum octane rating of 87. Avoid using ethanol blends higher than 10%.
Change the oil every 25 hours of operation or at least once per mowing season. Use SAE 30 oil for optimal performance.
Check the fuel level, ensure the spark plug is connected, inspect the air filter for clogs, and verify that the battery is charged if applicable.
Sharpen the blades at the start of each mowing season, or more frequently if needed. Ensure the mower is off and the spark plug is disconnected before removing blades.
The recommended tire pressure is 15 psi for the rear tires and 10 psi for the front tires. Regularly check and adjust the pressure as needed.
After each use, use a garden hose to rinse off grass clippings and debris from the cutting deck. Ensure the mower is off and the spark plug is disconnected before cleaning.
Excessive vibration can be caused by unbalanced blades, worn out bearings, or debris lodged in the cutting deck. Inspect and address these issues as needed.
Clean the mower thoroughly, stabilize the fuel, disconnect the battery, and store it in a dry, sheltered location. Cover the mower to protect it from dust and moisture.
Use the cutting height adjustment lever located near the wheel to set the desired mowing height. Ensure the mower is on a flat surface for accurate adjustment.