Husqvarna 6521CM 96133000401 Parts Manual

Husqvarna 6521CM 96133000401 Lawn Mower manual cover
Pages 3
Year 2008
Language(s)
English en

Husqvarna 6521CM 96133000401 Lawn Mower Specification

The Husqvarna 6521CM 96133000401 Lawn Mower is a robust and efficient machine designed for residential lawn maintenance. It is powered by a reliable 190cc Honda GCV160 engine, which ensures consistent performance and longevity. This lawn mower features a 21-inch steel cutting deck that provides a balance between maneuverability and cutting capacity, making it suitable for medium-sized lawns. The cutting deck is designed with a 3-in-1 system, allowing users to choose between mulching, bagging, or side discharge for versatile grass management.

The mower is equipped with adjustable cutting height settings ranging from 1.25 to 3.42 inches, enabling users to tailor the grass length according to their preferences and seasonal requirements. It incorporates a robust wheel system with 8-inch front and 12-inch rear wheels, enhancing stability and ease of movement across various terrains. The ergonomic design of the handle offers comfortable operation, reducing user fatigue during extended mowing sessions.

Additionally, the Husqvarna 6521CM features a foldable handle, making it convenient for storage and transportation. The mower is engineered with user-friendly controls and a straightforward startup process, requiring minimal effort to operate. Its durable construction and quality components ensure longevity and reduced maintenance needs, making it an excellent choice for homeowners looking for a dependable lawn care solution. Overall, the Husqvarna 6521CM 96133000401 Lawn Mower combines powerful performance with practical design elements to deliver an effective and user-friendly mowing experience.

Husqvarna 6521CM 96133000401 Lawn Mower F.A.Q.

What is the correct procedure for starting the Husqvarna 6521CM lawn mower?

To start the Husqvarna 6521CM, ensure the fuel tank is filled, the oil level is adequate, and the spark plug is connected. Engage the safety handle, pull the starter rope gently until resistance is felt, then pull briskly to start the engine.

How do I troubleshoot if the lawn mower does not start?

Check the fuel level and quality, ensure the spark plug is clean and properly connected, inspect the air filter for clogs, and verify that the safety handle is engaged.

What is the recommended maintenance schedule for this lawn mower?

Perform oil changes every 25 hours of use, clean or replace the air filter every 25 hours, sharpen the blade every 25 hours, and check the spark plug annually.

How can I adjust the cutting height of the Husqvarna 6521CM?

To adjust the cutting height, locate the height adjustment levers on each wheel. Move the levers to the desired height setting, ensuring all wheels are set to the same level.

What should I do if the lawn mower vibrates excessively during use?

Excessive vibration may indicate a damaged blade, loose hardware, or an unbalanced blade. Inspect the blade for damage, tighten any loose parts, and balance the blade if necessary.

How do I clean the underside of the mower deck?

Disconnect the spark plug for safety. Tip the mower onto its side, ensuring the air filter faces up. Use a brush or hose to remove grass clippings and debris from the mower deck.

What type of oil should be used for this lawn mower?

Use SAE 30 oil for most temperatures. If operating in temperatures below freezing, a synthetic SAE 5W-30 oil is recommended for improved performance.

How do I replace the spark plug on the Husqvarna 6521CM?

Disconnect the spark plug wire, use a socket wrench to remove the old spark plug, and install a new one with the correct gap setting. Reconnect the spark plug wire securely.

What steps should I take to winterize the lawn mower?

Clean the mower thoroughly, change the oil, drain the fuel or add a stabilizer, remove the spark plug and add a small amount of oil to the cylinder, and store the mower in a dry place.

How do I ensure the blade is properly balanced after sharpening?

Use a blade balancer to check for balance. If one side dips lower, remove additional material from the heavier side until the blade balances evenly on the tool.