Husqvarna 5524 ST 954223067 Parts Manual

Husqvarna 5524 ST 954223067 Snow Thrower manual cover
Pages 13
Year 2002
Language(s)
English en

Husqvarna 5524 ST 954223067 Snow Thrower Specification

The Husqvarna 5524 ST 954223067 Snow Thrower is engineered for robust performance in challenging winter conditions, providing an efficient solution for snow removal in residential areas. This model is equipped with a powerful 5.5 horsepower engine, ensuring optimal power delivery to tackle heavy and compacted snow. The snow thrower features a 24-inch clearing width, allowing it to efficiently clear large paths in a single pass, and a 20-inch intake height, which is suitable for handling deep snow accumulations.

The 5524 ST incorporates a two-stage system, which efficiently processes snow by using an auger to collect and a high-speed impeller to discharge it, resulting in increased throwing distance and reduced clogging. Its manual start system ensures reliability in cold weather, while the friction-disc transmission provides smooth and variable forward and reverse speeds to enhance maneuverability.

Designed with user comfort in mind, the snow thrower is equipped with adjustable handles to accommodate different operator heights and ergonomic controls for ease of use. The chute rotates 180 degrees, allowing precise control over snow discharge direction, which enhances operational flexibility. Robust tires with deep treads offer superior traction, even on icy surfaces, further increasing the machine's stability and safety during operation.

Durability is a key feature of the Husqvarna 5524 ST, with a heavy-duty auger housing and steel frame construction that withstands harsh conditions and prolonged use. This model is also designed for easy maintenance, featuring accessible service points to ensure long-term reliability and performance. The Husqvarna 5524 ST 954223067 Snow Thrower represents a blend of power, efficiency, and user-friendly design, making it an ideal choice for homeowners facing challenging snow removal tasks.

Husqvarna 5524 ST 954223067 Snow Thrower F.A.Q.

How do I start the Husqvarna 5524 ST snow thrower?

To start the Husqvarna 5524 ST snow thrower, ensure the fuel valve is open, set the choke to full, and turn the ignition key to the start position. Pull the starter handle or use the electric start button if equipped.

What type of fuel should I use for the Husqvarna 5524 ST?

Use unleaded gasoline with a minimum octane rating of 87. Avoid using fuel with more than 10% ethanol content.

How often should I change the oil in my Husqvarna 5524 ST?

Change the oil every season or after every 25 hours of operation, whichever comes first.

What maintenance should be performed before storing the snow thrower for the off-season?

Before storing, drain the fuel or add a fuel stabilizer, change the oil, clean the exterior, and check belts and cables for wear. Store in a dry place.

How can I troubleshoot if the snow thrower is not throwing snow effectively?

Check for a clogged chute, adjust the auger speed, and inspect the auger and impeller for damage or wear. Ensure all bolts are tightened.

What is the proper way to adjust the skid shoes on the Husqvarna 5524 ST?

To adjust the skid shoes, loosen the mounting nuts, raise or lower the skid shoes to the desired height, and then tighten the nuts securely.

How do I replace the spark plug on the Husqvarna 5524 ST?

Disconnect the spark plug wire, use a spark plug wrench to remove the old plug, insert the new plug, and reattach the spark plug wire.

What should I do if the snow thrower vibrates excessively during operation?

Stop the engine and inspect for damaged or loose parts, especially the auger and impeller. Tighten any loose parts and replace damaged components.

How do I adjust the chute direction on the Husqvarna 5524 ST?

Use the chute control lever located near the operator's position to rotate the chute in the desired direction.

What are the recommended tire pressures for the Husqvarna 5524 ST?

The recommended tire pressure for the Husqvarna 5524 ST is typically between 15-20 PSI. Refer to the user manual for exact specifications.