Husqvarna 136LiC Parts Manual
![Husqvarna 136LiC Trimmer manual cover](/images/OVMSCGkFmFYoAfYpNtduhpyj/thumbs/thumb175x175.webp)
To start the Husqvarna 136LiC Trimmer, ensure the battery is fully charged and properly inserted. Press and hold the power button until the indicator lights up, then gently squeeze the trigger to start trimming.
Regular maintenance includes cleaning the trimmer after each use, inspecting and replacing the trimmer line as needed, checking for loose parts, and ensuring the battery is charged and stored correctly.
If the trimmer is not starting, check if the battery is charged and correctly inserted. Ensure the power button is functioning and that there are no blockages in the trimmer head.
The Husqvarna 136LiC Trimmer is compatible with a 2.0 mm (0.08 inch) trimmer line. Always use a line recommended by Husqvarna for optimal performance.
To replace the trimmer line, turn off the trimmer and remove the battery. Open the trimmer head, remove the old line, and insert a new line following the direction indicated on the spool. Ensure the line is evenly wound.
If the trimmer line keeps breaking, ensure you are using the correct line diameter and check for any sharp objects or debris that might be cutting the line. Additionally, avoid hitting hard surfaces while trimming.
Yes, the Husqvarna 136LiC Trimmer can be used for edging. For best results, tilt the trimmer head slightly and walk along the edge you wish to trim, maintaining a steady pace.
Remove the battery before cleaning. Use a brush to remove grass and debris from the trimmer head and body. Wipe the exterior with a damp cloth, avoiding water entry into the motor area.
The runtime of the Husqvarna 136LiC Trimmer on a full charge varies depending on usage and conditions but typically ranges from 30 to 45 minutes.
Clean the trimmer thoroughly and remove the battery. Store the trimmer and battery in a dry, cool place away from direct sunlight and extreme temperatures. Charge the battery to about 50% before long-term storage.