Hoover HTUP 130WK User Instruction

To perform a basic maintenance check, ensure the appliance is unplugged. Check the lint filter and clean it if necessary. Inspect the door seal for any debris or damage. Ensure that the air vents are clear and free from obstructions.
Ensure the appliance is plugged in and the power outlet is working. Check the door to confirm it is closed properly. Verify that the start button is being pressed for the required duration.
Ensure the appliance is level on the floor. Check for any loose parts and tighten them. Remove any foreign objects from the drum or filter area that might be causing noise.
Remove the lint filter from the appliance. Use a soft brush or your fingers to remove the lint. Rinse the filter under warm water if necessary and allow it to dry completely before reinserting.
It's recommended to have a professional service the appliance annually to ensure optimal performance and longevity. Regularly clean components like the lint filter to prevent issues.
Immediately unplug the appliance. Check the lint filter and vents for blockages. If the issue persists, contact a qualified technician to inspect the appliance.
Ensure the load size is appropriate and not too large. Clean the lint filter before each use. Use the correct drying cycle for the fabric type. Make sure the room is well-ventilated.
Check if the lint filter is clean. Ensure the air vents are not blocked. Verify that the selected drying cycle matches the load type and size.
Yes, fabric softener sheets can be used. However, ensure they are placed on top of the load and not in direct contact with the drum to avoid residue buildup.
Ensure the appliance is in a location where the temperature is above 5°C (41°F). Avoid placing the dryer in unheated garages or external buildings during winter.