Hoover HOCH1T518FBK User Instruction
![Hoover HOCH1T518FBK manual cover](/images/fOqiVfcypULZRBmFlJyvrqhw/thumbs/thumb175x175.webp)
To set up your Hoover HOCH1T518FBK, first remove all packaging materials. Position the refrigerator in a well-ventilated area away from direct sunlight and heat sources. Ensure it is level by adjusting the feet. Plug it into a dedicated electrical outlet and allow it to run for at least 2 hours before adding food.
Check if the temperature settings are correct. Ensure the vents inside the fridge are not blocked. Clean the condenser coils at the back of the unit. If the issue persists, contact Hoover customer service for further assistance.
The Hoover HOCH1T518FBK is a frost-free model, so manual defrosting is not necessary. However, if you notice frost buildup, ensure the door seals are intact and that the door is closing properly.
To clean your Hoover refrigerator, unplug the unit and remove all food and shelves. Use a soft cloth with a solution of mild detergent and warm water to wipe the interior. Rinse with a damp cloth and dry with a towel. Clean the exterior with a suitable cleaner.
To change the light bulb, unplug the refrigerator. Locate the light cover inside the fridge, usually at the top. Remove the cover and unscrew the old bulb. Replace it with a new bulb of the same type and wattage. Reattach the cover and plug the unit back in.
Water pooling can be due to a blocked defrost drain. Clean the defrost drain hole using a pipe cleaner or similar tool. Ensure the refrigerator is level to allow proper drainage.
The temperature can be adjusted using the control panel inside the fridge. Press the temperature button until you reach the desired setting. Wait a few hours for the temperature to stabilize after adjustments.
Check if the refrigerator is level and that it is not touching any adjacent surfaces. Ensure all shelves and bins are properly seated. If the noise persists, contact Hoover customer support.
Keep the refrigerator away from heat sources and ensure good ventilation around it. Do not overload the fridge, and ensure that the door seals are clean and intact. Regularly check and adjust the temperature settings to optimal levels.
If the door seal is damaged, it should be replaced to maintain efficiency. Contact Hoover for a replacement seal and follow the instructions provided to install it correctly, or seek professional assistance.