Honda VFR800F Interceptor 2015 Operation Guide
![Honda VFR800F Interceptor 2015 Motorcycle manual cover](/images/WOOSPuGFDvreOJYrSUNTXFqL/thumbs/thumb175x175.webp)
The oil should typically be changed every 4,000 miles or 6 months, whichever comes first. However, refer to the owner's manual for specific guidance based on your riding conditions.
Honda recommends using a high-quality ethylene glycol-based coolant for aluminum engines. Ensure it is a silicate-free formulation to prevent corrosion.
To reset the service light, turn the ignition on while holding the select and reset buttons on the instrument panel until the light turns off. Refer to the manual for detailed steps.
The recommended tire pressure is 36 psi for the front tire and 42 psi for the rear tire. Always check the pressure when the tires are cold.
To improve fuel efficiency, maintain proper tire pressure, use high-quality fuel, and ensure regular maintenance like air filter and spark plug replacement. Avoid aggressive acceleration and heavy loads.
If the engine is overheating, check the coolant level and fan operation. Stop the motorcycle, turn off the engine, and allow it to cool. Investigate for leaks or blockages in the cooling system.
To adjust the chain tension, place the bike on a stand, loosen the axle nut, and adjust the chain adjusters evenly on both sides. Aim for 1 to 1.5 inches of slack in the chain. Tighten the axle nut securely after adjustment.
At 12,000 miles, you should check and adjust valve clearances, replace the air filter, inspect the brake system, and perform a thorough inspection of the bike. Consult the service manual for a complete checklist.
Begin by checking the battery connections and fuses. Use a multimeter to test the battery voltage and continuity of wires. Inspect the ignition switch and relays for faults. Consult the wiring diagram in the service manual for further guidance.
Use DOT 4 brake fluid for the Honda VFR800F Interceptor. Ensure the fluid is from a sealed container to avoid moisture contamination. Regularly check and replace the fluid as needed.