Honda 31GGLA00 Metropolitan 2013 Operation Guide
![Honda 31GGLA00 Metropolitan 2013 Scooter manual cover](/images/iiNBLuwRrULXmduhyUeRxDWd/thumbs/thumb175x175.webp)
Ensure the scooter is on a level surface. Turn the ignition key to the 'ON' position, ensure the kickstand is up, press the brake lever, and then press the start button.
Use unleaded gasoline with a pump octane number of 86 or higher. Avoid using fuel with more than 10% ethanol.
Warm up the engine, place the scooter on its center stand, remove the oil drain bolt and washer, allow the oil to drain completely, replace the washer and bolt, and refill with the recommended oil type and amount.
The recommended tire pressure is 29 psi for the front tire and 33 psi for the rear tire. Check the pressure when the tires are cold.
Check the battery connections, ensure the kill switch is in the 'RUN' position, verify fuel level, and check the spark plug for fouling. If issues persist, consult a professional mechanic.
Regular maintenance should be performed every 2,500 miles or six months, whichever comes first. Refer to the owner's manual for a detailed maintenance schedule.
Check the headlight bulb to ensure it's not burnt out, inspect the fuse, and verify wiring connections. Replace any faulty components as needed.
Locate the idle adjustment screw on the carburetor, and turn it slightly clockwise to increase idle speed or counterclockwise to decrease it. Adjust while the engine is warm and running.
Secure the scooter on a stable surface, remove the wheel nuts, take off the wheel, replace the tire, and reassemble. Ensure proper alignment and torque on the nuts.
Maintain regular service intervals, ensure tires are properly inflated, avoid excessive idling, and ride at moderate speeds. Reducing weight and using high-quality fuel can also help.