Honda TRX520FA5 4X4 DCT EPS Foreman Rubicon 2024 Manual

Honda recommends using SAE 10W-30 or 10W-40, Pro Honda GN4 or HP4 4-stroke oil, or an equivalent motorcycle oil that meets or exceeds the requirements for API service classification SJ or later.
It is recommended to change the oil every 100 hours of operation or every 600 miles, whichever comes first. Always refer to the owner's manual for specific maintenance intervals.
First, check the battery terminals for corrosion or loose connections. If the battery is old, it may need replacement. Ensure the charging system is functioning properly by testing the voltage with a multimeter.
Inspect the brake pads for wear and ensure the brake fluid is at the correct level. Test the brakes by applying them gently while moving to ensure they engage smoothly without any unusual noises.
The recommended tire pressure is 4 psi for the front tires and 4 psi for the rear tires. Always check tire pressure when the tires are cold for an accurate reading.
Remove the air filter cover and take out the filter. Clean it using compressed air or wash it with soapy water if it's a foam filter. Ensure the filter is completely dry before reinstalling.
Check the transmission fluid level and quality. Make sure the fluid is not dirty or low. Inspect the shift linkage for any obstructions or damage. Consult a professional if the issue persists.
Regular maintenance such as keeping the air filter clean, ensuring the tires are properly inflated, and using the recommended grade of oil can help improve fuel efficiency. Avoid carrying unnecessary weight and maintain a steady speed when possible.
Use Pro Honda HP coolant or any high-quality ethylene glycol-based coolant that is specifically formulated for aluminum engines. Ensure it is mixed in the correct ratio of 50:50 with distilled water.
Check the drive shaft and joints every 200 hours of operation for signs of wear or damage. Ensure the joints are properly lubricated and free of debris.