Honda TRX500FM6 4X4 Foreman Rubicon 2018 Manual

Use a high-quality 10W-40 or 5W-30 four-stroke motorcycle oil that meets or exceeds the specifications set by the manufacturer. Ensure that the oil is suitable for wet clutches.
It is recommended to change the engine oil every 100 hours of operation or annually, whichever comes first. Additionally, change the oil filter with every oil change.
The recommended tire pressure is 5.0 psi (34 kPa) for both front and rear tires. Always check tire pressure when the tires are cold for accurate readings.
Check the battery connections and ensure they are clean and tight. Verify that the battery is fully charged. If the ATV still won't start, inspect the fuses and check for any fuel delivery issues.
Regularly inspect the brake pads for wear and replace them if necessary. Check the brake fluid level and top it up with the recommended fluid. Ensure that there are no leaks in the brake lines.
To engage the 4X4 mode, stop the ATV and move the drive select lever to the 4X4 position. Ensure that the vehicle is on a stable surface before engaging.
Stop the ATV immediately and allow the engine to cool down. Check the coolant level and top it up if necessary. Inspect the radiator for any blockages and clean it. If the problem persists, seek professional assistance.
Remove the air filter from the ATV and gently clean it with compressed air or wash it with a mild detergent. Allow it to dry completely before reinstalling it. Never operate the ATV without the air filter in place.
Replace the spark plug every 12,000 miles or every 24 months, whichever comes first. Use a spark plug that matches the specifications provided in the owner’s manual.
Maintain proper tire pressure, perform regular maintenance such as oil changes and air filter cleaning, and avoid excessive idling. Riding at moderate speeds and reducing load can also enhance fuel efficiency.