Honda TRX500FE2 4X4 ES FourTrax Foreman 2019 Manual
![Honda TRX500FE2 4X4 ES FourTrax Foreman 2019 ATV manual cover](/images/BggFQycfhhFQkdgzHiCaSwfQ/thumbs/thumb175x175.webp)
The recommended oil type for the Honda TRX500FE2 is SAE 10W-30, with an API classification of SG or higher.
To change the oil, warm up the engine, turn it off, and place the ATV on a level surface. Remove the oil drain plug and drain the oil. Replace the oil filter, reinstall the drain plug, and fill with the recommended oil type.
To adjust the valve clearance, ensure the engine is cool. Remove the valve cover and rotate the engine to the top dead center on the compression stroke. Use a feeler gauge to measure and adjust the clearance by loosening the lock nut and turning the adjuster screw.
If the ATV won't start, check the battery connections, ensure the fuel valve is on, inspect the spark plug, and verify that the kill switch is not engaged. If these are fine, consider checking the starter motor and solenoid.
Regular maintenance includes checking the oil level before each ride, changing the oil every 100 hours or annually, inspecting the air filter, and adjusting the brakes and throttle as needed. Refer to the owner's manual for a complete schedule.
To clean the air filter, remove the air filter cover and take out the filter. Wash it in a non-flammable solvent, let it dry, and re-oil it lightly before reinstalling it. Ensure the filter is seated properly in its housing.
If the ATV is overheating, check the coolant level in the radiator and reservoir. Inspect for any coolant leaks, clean the radiator fins, and ensure the fan is operational. Avoid running the engine in high temperatures without adequate airflow.
To improve fuel efficiency, maintain recommended tire pressure, reduce excess weight, regularly clean the air filter, and ensure that the engine is properly tuned. Avoid aggressive acceleration and maintain a steady speed when possible.
The recommended spark plug for the Honda TRX500FE2 is NGK DPR7EA-9 or the equivalent. Ensure the gap is set to the specification in the owner's manual.
To replace the battery, remove the seat and battery cover. Disconnect the negative (-) terminal first, then the positive (+) terminal. Remove the old battery, place the new one in the compartment, and reconnect the terminals in reverse order.