Honda TRX250TE3 FourTrax Recon ES 2021 Manual
![Honda TRX250TE3 FourTrax Recon ES 2021 ATV manual cover](/images/NWznQfZtVtfZYoswmuggTLIQ/thumbs/thumb175x175.webp)
To break in your ATV, avoid full-throttle starts and rapid acceleration for the first 15 hours of operation. Vary the engine speed and avoid prolonged periods of idling. Ensure regular checks on oil levels and replace the oil after the initial 20 hours.
Honda recommends using 10W-30 or 10W-40 four-stroke motorcycle oil that meets or exceeds the API service classification of SG or higher. Make sure it is JASO MA-rated for wet clutches.
Check the battery connections for corrosion or looseness. Ensure the fuel valve is on and that there's enough fuel. Inspect the spark plug for wear or damage and replace if necessary. Lastly, check the air filter for clogs.
The recommended tire pressure is 2.9 psi for the front tires and 2.9 psi for the rear tires. Always check and adjust tire pressure when the tires are cold.
Regularly inspect the chain for tension and lubrication. Clean the chain with a suitable chain cleaner and apply a high-quality chain lubricant after every ride, especially in wet or dusty conditions. Adjust the tension if necessary, ensuring it has 20-30 mm of slack.
Stop the ATV immediately and let the engine cool down. Check the coolant level and top it off if necessary. Inspect the radiator for blockages or debris and clean it. Ensure the fan is operational. If the problem persists, consult a professional mechanic.
Inspect the air filter every 20 hours of operation or more frequently in dusty conditions. Clean it as needed and replace it every 100 hours or annually, whichever comes first.
The spark plug should be inspected every 100 hours and replaced every 200 hours or annually to ensure optimal engine performance. Always use a spark plug type recommended by Honda for your model.
Warm up the engine and place the ATV on a level surface. Remove the oil drain plug and allow the oil to drain completely. Replace the drain plug gasket if necessary. Reinstall the drain plug and refill the engine with the recommended oil type and capacity.
Before each ride, check the tire pressure, brakes, throttle operation, and lights. Ensure there are no fuel or oil leaks and that the drive chain is properly lubricated and tensioned. Verify that the steering operates smoothly and that all controls are functioning correctly.