Honda TRX250TE FourTrax Recon ES 2014 Manual

To start the Honda TRX250TE, ensure the ATV is in neutral, turn the ignition switch to 'ON', and then press the starter button located on the right handlebar.
It is recommended to use SAE 10W-30 or 10W-40 4-stroke motorcycle oil that meets API service classification SG or higher.
The oil should be changed every 100 hours of operation, or every 600 miles, whichever comes first. Be sure to check the oil level regularly between changes.
The recommended tire pressure for both front and rear tires is 2.2 psi when checked cold.
First, check the battery connections for tightness and corrosion. Ensure the main fuse is intact and inspect the wiring harness for any visible damage or disconnections.
Locate the idle speed adjustment screw on the carburetor. Turn it clockwise to increase idle speed and counterclockwise to decrease it, aiming for an idle speed of 1,400 rpm.
Check the fuel level, ensure the ATV is in neutral, inspect the kill switch position, and verify the battery is charged. If necessary, consult the owner's manual for further diagnostics.
Regularly inspect the brake pads for wear and replace them if necessary. Check the brake fluid level and top it up with DOT 4 fluid as needed. Ensure the brake cables are properly adjusted.
Regular maintenance includes oil changes, air filter cleaning/replacement, brake inspection, tire pressure checks, and ensuring all nuts and bolts are tightened to specification.
Remove the air filter cover, take out the filter, and wash it with mild soap and water. Allow it to dry completely, then apply air filter oil before reinstalling.