Honda Super Cub CUB125A 2019 Operation Guide
![Honda Super Cub CUB125A 2019 Motorcycle manual cover](/images/yrwkQkIklkVmEZKGtycQdmOH/thumbs/thumb175x175.webp)
To change the oil on your Honda Super Cub CUB125A 2019, start by placing the bike on a stable stand. Locate the oil drain plug under the engine, remove it, and allow the oil to drain into a pan. Remove the oil filter and replace it with a new one. Reinstall the drain plug and fill the engine with the recommended type and amount of oil, as specified in the owner's manual.
The recommended oil for the Honda Super Cub CUB125A 2019 is a high-quality 10W-30 motorcycle oil that meets the JASO T 903 standard for MA or MA2. Always check the owner’s manual for specific recommendations.
If your Honda Super Cub CUB125A 2019 is having trouble starting, check the following: ensure the kill switch is in the run position, verify the fuel level, check the battery charge, and inspect the spark plug for wear or damage. If the issue persists, consult a professional mechanic.
The air filter on a Honda Super Cub CUB125A 2019 should be inspected every 4,000 miles and replaced every 8,000 miles, or more frequently if ridden in dusty conditions. Always refer to the owner’s manual for maintenance intervals.
The recommended tire pressure for the Honda Super Cub CUB125A 2019 is 29 psi for the front tire and 33 psi for the rear tire. Always check tire pressure when the tires are cold and refer to the owner’s manual for specific guidance.
To adjust the chain tension on a Honda Super Cub CUB125A 2019, place the motorcycle on a stand. Loosen the rear axle nut and adjust the chain tensioners evenly on both sides until the chain has about 20-30 mm of slack at the midpoint. Tighten the axle nut and check alignment.
If your Honda Super Cub CUB125A 2019 overheats, stop riding immediately and let the engine cool down. Check the coolant level, inspect the radiator for blockages, and ensure the cooling fan is operational. If the problem persists, seek professional servicing.
To replace a blown fuse on the Honda Super Cub CUB125A 2019, locate the fuse box under the seat. Remove the seat to access the fuse box, identify the blown fuse, and replace it with one of the same amperage. Ensure all connections are secure before reassembling.
Regularly inspect the brake pads for wear and replace them if necessary. Check the brake fluid level and top up with the recommended DOT 4 brake fluid if needed. Ensure the brake lines are free of leaks and the brake levers are functioning smoothly.
Regular maintenance for the Honda Super Cub CUB125A 2019 includes oil changes, chain lubrication and adjustment, air filter checks, brake inspections, tire pressure checks, and ensuring all lights and signals are operational. Refer to the owner’s manual for the full maintenance schedule.