Honda ST1300 A 2010 Manual

Honda ST1300 A 2010 Motorcycle manual cover
Pages 216
Year 2010
Language(s)
English en

Honda ST1300 A 2010 Motorcycle Specification

The 2010 Honda ST1300 A is a high-performance sport-touring motorcycle designed for riders seeking comfort, speed, and reliability. At the heart of the ST1300 A is a liquid-cooled, longitudinally-mounted 1261cc V4 engine, delivering smooth, responsive power across a broad RPM range. The engine is equipped with a Programmed Fuel Injection (PGM-FI) system, ensuring optimal fuel efficiency and performance under varying riding conditions.

The motorcycle features a five-speed transmission, with gear ratios optimized for both spirited riding and long-distance touring. The shaft drive system minimizes maintenance and enhances durability. The ST1300 A's chassis is constructed from a lightweight yet rigid aluminum frame, providing excellent handling characteristics and stability at high speeds.

Suspension duties are managed by a 45mm telescopic front fork with 4.6 inches of travel and a rear Pro-Link single shock with 4.8 inches of travel. This setup offers a comfortable ride while maintaining precise control. The braking system includes dual 310mm front discs with three-piston calipers and a single 316mm rear disc with a three-piston caliper, all integrated with Honda's Combined Braking System (CBS) and Anti-lock Braking System (ABS) for enhanced safety.

The ST1300 A's ergonomic design features an adjustable windscreen and a three-position adjustable seat, catering to riders of different heights and preferences. The motorcycle boasts a 7.7-gallon fuel tank, providing an impressive range for extended journeys. The instrument cluster includes a comprehensive array of gauges and indicators, ensuring the rider is well-informed at all times.

Weighing in at approximately 730 pounds, the Honda ST1300 A balances substantial touring capabilities with agile handling. Its blend of performance, comfort, and advanced technology makes it a standout choice for long-distance riders seeking a versatile and dependable machine.

Honda ST1300 A 2010 Motorcycle F.A.Q.

How do I check the oil level on a Honda ST1300 A 2010?

To check the oil level on your Honda ST1300 A 2010, ensure the bike is on level ground and has been off for a few minutes. Use the oil sight glass located on the right side of the engine. The oil level should be between the upper and lower marks.

What is the recommended tire pressure for a Honda ST1300 A 2010?

For the Honda ST1300 A 2010, the recommended tire pressure is 42 psi for both the front and rear tires. Always check your tire pressure when the tires are cold for the most accurate reading.

How often should I replace the air filter on my Honda ST1300 A 2010?

The air filter on a Honda ST1300 A 2010 should be inspected every 12,000 miles and replaced if necessary. However, if you ride in very dusty conditions, consider checking and replacing it more frequently.

What type of coolant is suitable for a Honda ST1300 A 2010?

Use a high-quality ethylene glycol-based coolant specifically formulated for aluminum engines. Ensure it is mixed with demineralized or distilled water at a 50/50 ratio.

How do I troubleshoot a starting problem with a Honda ST1300 A 2010?

If your Honda ST1300 A 2010 won't start, check the battery connections for corrosion or looseness, ensure the kill switch is set to 'Run', and verify the fuel supply. If these checks are fine, inspect the starter relay and fuses.

What is the correct procedure for changing the brake fluid on a Honda ST1300 A 2010?

To change the brake fluid, first remove the old fluid from the reservoir. Refill with new DOT 4 brake fluid, then bleed the brakes starting from the caliper farthest from the master cylinder. Repeat until the fluid runs clear and free of air bubbles.

How often should the spark plugs be replaced on a Honda ST1300 A 2010?

The spark plugs on a Honda ST1300 A 2010 should be replaced every 16,000 miles to maintain optimal engine performance. Ensure you use the recommended spark plug type specified in the owner's manual.

What should I do if my Honda ST1300 A 2010 is overheating?

If your Honda ST1300 A 2010 is overheating, first check the coolant level and top it off if necessary. Inspect the radiator and coolant hoses for leaks and ensure the cooling fan is operational. If the problem persists, consult a professional mechanic.

How do I adjust the suspension on a Honda ST1300 A 2010?

To adjust the suspension, locate the preload adjusters on the front forks and rear shock. Use the appropriate tool to turn the adjusters clockwise to increase preload or counterclockwise to decrease it, based on your riding preference and load.

What is the maintenance schedule for a Honda ST1300 A 2010?

The maintenance schedule includes oil changes every 8,000 miles, air filter checks every 12,000 miles, and coolant replacement every 24,000 miles. Regularly inspect brake pads, tires, and drive components. Consult the owner's manual for a detailed schedule.