Honda S2000 2006 Specification
The chassis of the S2000 features a rigid X-bone frame structure, enhancing structural rigidity and handling precision. Suspension duties are managed by a double-wishbone setup both at the front and rear, providing exceptional handling characteristics and a balanced ride. The vehicle's dimensions include a wheelbase of 94.5 inches, an overall length of 162.2 inches, a width of 68.9 inches, and a height of 50.6 inches, contributing to its compact and agile demeanor.
Inside, the S2000 is equipped with a driver-focused cockpit, including bolstered sport seats, a digital instrument cluster, and a leather-wrapped steering wheel. Standard features include air conditioning, a CD audio system, and power windows and locks. Safety is addressed with dual front airbags, anti-lock brakes (ABS), and stability control.
The exterior design is aerodynamic and sleek, with a power-operated soft top that can be retracted to enhance the open-air driving experience. The car rides on 17-inch alloy wheels, and its stopping power is provided by ventilated disc brakes at the front and solid discs at the rear.
Overall, the 2006 Honda S2000 remains a celebrated model for enthusiasts, offering a compelling mix of performance, handling, and classic roadster appeal.
Honda S2000 2006 F.A.Q.
What is the recommended oil type and capacity for the Honda S2000 2006?
The recommended oil type for the Honda S2000 2006 is SAE 10W-30 or 5W-40, depending on the climate. The engine oil capacity is approximately 5.1 quarts with a filter change.
How do I reset the maintenance required light on my Honda S2000 2006?
To reset the maintenance required light, turn the ignition switch to the ON position. Press and hold the trip meter reset button until the indicator resets, which typically takes about 10 seconds.
What is the proper tire pressure for the Honda S2000 2006?
The recommended tire pressure for the Honda S2000 2006 is 32 psi for both the front and rear tires. Always check tire pressure when the tires are cold.
How often should I replace the timing chain on my Honda S2000 2006?
The Honda S2000 2006 is equipped with a timing chain, which is designed to last the life of the engine. Regular inspections are recommended, but replacement is generally not needed unless there is an issue.
What is the procedure for bleeding the clutch on a Honda S2000 2006?
To bleed the clutch, locate the bleeder valve on the slave cylinder. Attach a clear hose to the valve and submerge the end in a container of brake fluid. Have an assistant pump the clutch pedal several times, then hold it down. Open the bleeder valve to release air and fluid. Close the valve, then release the pedal. Repeat until no air bubbles are visible.
What type of transmission fluid is recommended for a Honda S2000 2006?
Honda recommends using Honda ATF-Z1 (automatic transmission fluid) or a high-quality equivalent for the manual transmission in the S2000 2006. It is important to use the correct fluid to ensure proper transmission performance.
How can I troubleshoot a non-working convertible top on my Honda S2000 2006?
First, check the convertible top fuse and relay. If those are functioning, inspect the hydraulic fluid level in the convertible top motor. Additionally, check for any obstructions or damage to the top mechanism. Consult a professional if the issue persists.
What is the spark plug replacement interval for a Honda S2000 2006?
The spark plug replacement interval for the Honda S2000 2006 is typically every 30,000 miles. However, it is recommended to check the condition of the spark plugs during regular maintenance.
How do I jump-start a Honda S2000 2006?
To jump-start your Honda S2000 2006, connect the positive (red) jumper cable to the positive terminal of the dead battery, then to the positive terminal of the good battery. Connect the negative (black) cable to the negative terminal of the good battery, and the other end to a grounded metal part of the dead car. Start the engine of the vehicle providing the jump, then start the S2000.
What is the recommended coolant for a Honda S2000 2006, and how often should it be changed?
The recommended coolant for the Honda S2000 2006 is Honda Long-Life Antifreeze/Coolant Type 2. It should be changed every 60,000 miles or every 5 years, whichever comes first. Always use a 50/50 mixture of coolant and distilled water.