Honda Pioneer SXS700 M2 2020 Manual
![Honda Pioneer SXS700 M2 2020 UTV manual cover](/images/ueLHAlLEkCEIIpJGuTkpiqNA/thumbs/thumb175x175.webp)
The recommended maintenance schedule includes checking the oil level before each use, changing the oil and filter every 600 miles or 100 hours, and inspecting the air filter every 200 miles or 20 hours. Regularly check the brakes, tires, and coolant levels.
Check the battery connections for corrosion or looseness, ensure the fuel level is adequate, and verify that the fuel shut-off valve is in the 'ON' position. If the UTV still won't start, inspect the spark plug for wear or damage.
Honda recommends using SAE 10W-30 API service classification SG or higher motor oil for the Pioneer SXS700 M2 2020.
To improve fuel efficiency, ensure regular maintenance is performed, keep the tires properly inflated, avoid excessive idling, and reduce unnecessary weight from the vehicle.
If the brakes feel spongy, check the brake fluid level and inspect for any leaks in the brake lines. Bleed the brakes to remove any air trapped in the system. If the problem persists, consult a professional mechanic.
To store the UTV for winter, clean it thoroughly, change the oil and filter, top off the fuel tank and add a fuel stabilizer, disconnect the battery, and cover the vehicle to protect it from dust and moisture.
The recommended tire pressure for the front tires is 8 psi and for the rear tires is 8 psi. Always check the owner's manual for specific guidance.
To adjust the suspension, use the preload adjuster on the shocks. Turn it clockwise to increase preload and counterclockwise to decrease it. Check the manual for detailed instructions and recommended settings.
If the UTV overheats, stop the vehicle immediately and allow it to cool. Check the coolant level and inspect for leaks. Ensure the radiator is not clogged with debris. If the problem persists, seek professional assistance.
To replace the air filter, remove the seat and engine cover to access the air filter box. Open the box, remove the old filter, and insert a new one. Ensure the filter is seated correctly before reassembling.