Honda Pioneer 500 SXS500M2 2023 Manual

The recommended tire pressure for the Honda Pioneer 500 SXS500M2 2023 is 12 psi for both the front and rear tires.
To perform an oil change, warm up the engine, remove the drain plug, let the oil drain completely, replace the drain plug, and refill with the recommended oil type and amount.
It is recommended to use SAE 10W-30 or 10W-40, API standard, JASO T 903 MA standard oil for optimal performance.
Check the battery charge and connections, ensure the fuel level is adequate, inspect the spark plug for wear, and ensure the engine stop switch is in the 'run' position.
Remove the air filter cover, take out the air filter, wash it with a mild detergent, dry it thoroughly, and re-oil before reinstalling.
It is recommended to inspect the spark plug every 8,000 miles and replace it as necessary to ensure optimal engine performance.
After riding in muddy or wet conditions, thoroughly wash the vehicle, inspect and lubricate the chain, check the brakes and other moving parts for debris, and ensure the air filter is clean.
The suspension can be adjusted by changing the preload on the shocks. Use the preload adjuster to increase or decrease the spring tension based on your riding needs.
If overheating occurs, stop the vehicle immediately, let it cool down, check the coolant level, inspect for leaks, and ensure the radiator is clear of debris.
To improve fuel efficiency, maintain proper tire pressure, perform regular maintenance, avoid excessive idling, and drive at a steady speed.