Honda NPS50 Ruckus 2018 Operation Guide
![Honda NPS50 Ruckus 2018 Scooter manual cover](/images/XVUKwMvLhrQFxywoCHMZBVYx/thumbs/thumb175x175.webp)
If your Honda Ruckus hasn't been used for a while, ensure the battery is charged. Turn the ignition key to the "ON" position, ensure the kill switch is in the "RUN" position, and press the starter button while holding the brake lever.
For the Honda NPS50 Ruckus 2018, it is recommended to use SAE 10W-30 motor oil that meets the API service classification of SG or higher.
The oil in your Honda NPS50 Ruckus should be changed every 2,500 miles or once a year, whichever comes first.
If your scooter won't start, check the following: battery charge, fuel level, kill switch position, and ensure the brake lever is held while starting. If all seem fine, consult a professional mechanic.
To improve fuel efficiency, regularly maintain your scooter by changing the oil, cleaning the air filter, and maintaining proper tire pressure. Avoid aggressive acceleration and maintain a steady speed.
To check the tire pressure, use a tire gauge on the valve stem of each tire. The recommended tire pressure is typically found in the owner's manual or on a sticker on the scooter.
The recommended tire pressure for the Honda NPS50 Ruckus 2018 is 25 psi for the front tire and 29 psi for the rear tire.
To maintain the battery, keep it clean and dry, ensure connections are tight, and charge it regularly, especially if the scooter is not used frequently. Consider using a battery tender if stored for long periods.
Check the fuses and bulbs if the lights aren't working. Replace any blown fuses or burnt-out bulbs. If the issue persists, check the wiring or consult a professional mechanic.
To clean the air filter, remove the air filter cover, take out the filter, and clean it with compressed air or replace if necessary. Ensure it's completely dry before reinstallation.