Honda NPS50 Ruckus 2016 Operation Guide

To change the oil, place the scooter on its center stand and locate the oil drain bolt underneath the engine. Use a wrench to remove the bolt and let the oil drain into a pan. Replace the drain bolt and fill the engine with 0.6 quarts of 10W-30 motorcycle oil through the oil filler cap.
The recommended tire pressure for the front tire is 29 psi and for the rear tire is 33 psi. Always check the pressure when the tires are cold.
If your Ruckus won't start, check the battery charge, ensure the fuel valve is open, and verify the kill switch is set to 'run'. If these are in order, inspect the spark plug and replace it if necessary.
Replace the air filter every 12,000 miles or 18 months, whichever comes first. Consider more frequent replacement if you ride in dusty environments.
The Honda Ruckus 2016 uses a 50/50 mix of ethylene glycol-based antifreeze and distilled water. Ensure the coolant is labeled as safe for use with aluminum engines.
To improve fuel efficiency, maintain proper tire pressure, perform regular maintenance such as oil changes and air filter replacements, and avoid rapid acceleration and excessive idling.
To store your Ruckus, add a fuel stabilizer to the gas, change the oil, inflate the tires to the recommended pressure, disconnect the battery, and cover the scooter to protect it from dust and moisture.
To adjust the brakes, locate the adjustment nut near the brake lever or on the brake drum. Turn the nut clockwise to tighten or counterclockwise to loosen until you achieve the desired brake tension.
Poor acceleration could be caused by a clogged air filter, worn spark plug, or issues with the fuel system. Check and replace these components if necessary.
The Honda Ruckus has a continuously variable transmission (CVT) that does not require regular fluid checks. If you experience issues, consult a professional mechanic for transmission inspection.