Honda NCW50 Metropolitan 2020 Operation Guide
![Honda NCW50 Metropolitan 2020 Scooter manual cover](/images/qcYXYGBwwfbUSPurdStXlwze/thumbs/thumb175x175.webp)
To break in your Honda NCW50, avoid full-throttle starts and rapid acceleration for the first 300 miles. Vary the engine speed and avoid prolonged idling to help the engine components settle in effectively.
Honda recommends using SAE 10W-30, JASO T 903 standard MA motor oil. Change the oil every 2,500 miles or once a year, whichever comes first.
If your scooter won't start, check the battery connections and ensure the battery is charged. Verify the fuel level and inspect the spark plug for wear or damage.
Inspect the brakes, check tire pressure and tread, lubricate pivot points, and inspect the air cleaner. Adjust as necessary to ensure optimal performance.
Locate the idle adjustment screw near the carburetor. Turn it clockwise to increase idle speed or counterclockwise to decrease it. Adjust until the engine idles smoothly.
The recommended tire pressure for the front tire is 29 psi and for the rear tire is 33 psi. Regularly check and adjust to maintain optimal handling and safety.
To replace the headlight bulb, remove the front cover by unscrewing the screws, disconnect the bulb connector, and replace the old bulb with a new one. Reassemble the cover securely.
If the engine overheats, pull over safely, turn off the engine, and allow it to cool. Check the coolant level if applicable, and inspect for leaks or blockages in the cooling system.
Maintain proper tire pressure, perform regular maintenance, avoid excessive idling, and ride smoothly without rapid acceleration to enhance fuel efficiency.
For winter storage, clean the scooter thoroughly, use a fuel stabilizer, remove the battery and store it in a warm place, and cover the scooter to protect it from dust and moisture.