Honda NCW50 Metropolitan 2017 Operation Guide
![Honda NCW50 Metropolitan 2017 Scooter manual cover](/images/jTGoTzvHeFcaBjHjNFHWVijJ/thumbs/thumb175x175.webp)
The recommended tire pressure for the Honda NCW50 Metropolitan 2017 is 25 psi for the front tire and 29 psi for the rear tire.
It is recommended to change the engine oil every 2,500 miles or every 6 months, whichever comes first.
The suitable engine oil for the Honda NCW50 Metropolitan 2017 is 10W-30, JASO T 903 standard MA.
If the scooter is having starting issues, check the battery charge, ensure the fuel valve is open, inspect the spark plug, and verify that the kill switch is in the correct position.
To clean the air filter, remove it and gently tap it to remove any loose dirt. If it is very dirty, wash it with a mild detergent, rinse thoroughly, and let it dry completely before reinstalling.
To adjust the brakes, locate the adjustment nut near the brake lever or pedal and turn it to tighten or loosen the brake tension as needed. Ensure the brakes are responsive and not too tight.
The fuel capacity of the Honda NCW50 Metropolitan 2017 is approximately 1.2 gallons (4.5 liters).
To improve fuel efficiency, maintain proper tire pressure, perform regular maintenance such as oil changes and air filter cleaning, and avoid aggressive acceleration and braking.
To replace the headlight bulb, remove the front cover of the scooter, disconnect the electrical connector from the bulb, and replace it with a new bulb of the same specification. Reattach the connector and cover.
If the engine overheats, stop the scooter immediately and let it cool down. Check the coolant level and ensure it is adequate. If the problem persists, have the scooter checked by a professional mechanic.