Honda Monkey 125A 2022 Manual
![Honda Monkey 125A 2022 Motorcycle manual cover](/images/MMTBpXREhElDAdlRKsQofLIn/thumbs/thumb175x175.webp)
To break in your Honda Monkey 125A engine, avoid full-throttle starts and rapid acceleration for the first 300 miles. Gradually increase speed and vary the engine RPMs during this period. Remember to change the oil after the break-in period to ensure optimal engine performance.
Use a high-quality 10W-30 motorcycle oil that meets the API service classification of SG or higher, as recommended in the owner's manual. Ensure it is suitable for motorcycles with a wet clutch.
Regular maintenance should be performed every 4,000 miles or 6 months, whichever comes first. This includes checking and adjusting the chain, inspecting brakes, and performing an oil change. Refer to the owner's manual for a detailed maintenance schedule.
If your motorcycle won't start, check the battery connections and charge if necessary. Ensure the fuel valve is on, the engine kill switch is set to the run position, and the transmission is in neutral. If it still doesn't start, consult a professional mechanic.
To improve fuel efficiency, maintain proper tire pressure, avoid excessive idling, and perform regular maintenance such as air filter cleaning and oil changes. Riding smoothly and avoiding rapid acceleration can also help.
The recommended tire pressure for the Honda Monkey 125A is typically 29 psi for the front tire and 29 psi for the rear tire, but it's best to check the owner's manual or the tire sidewall for specific recommendations.
To adjust the chain tension, place the bike on its center stand. Loosen the rear axle nut, then adjust the chain tensioners on both sides equally until the chain has about 20-30 mm of slack. Tighten the axle nut securely after adjustment.
If your motorcycle overheats, turn off the engine immediately and let it cool down. Check the coolant level and refill if necessary. Inspect the radiator and cooling system for leaks or obstructions. If the problem persists, seek professional assistance.
To clean the air filter, remove it from the airbox and gently clean it using compressed air or wash it with a mild detergent if it's a reusable type. Ensure it is completely dry before reinstalling. Replace it if it is excessively dirty or damaged.
Signs that brake pads need replacement include squeaking or grinding noises, reduced braking efficiency, and a brake lever that feels spongy. Inspect the pads regularly and replace them if the friction material is worn down to the minimum thickness.