Honda Insight 2014 Owner's Manual
![Honda Insight 2014 manual cover](/images/a0e2b49b3335c7877cc5e3ee/thumbs/thumb175x175.webp)
To reset the maintenance light, turn the ignition to the "On" position without starting the engine. Press the "Select/Reset" button until the maintenance message appears. Hold the "Select/Reset" button for about 10 seconds until the maintenance light starts to blink. Release and then press the button again for 5 seconds until the light resets.
The 2014 Honda Insight typically requires SAE 0W-20 full synthetic oil for optimal performance and fuel efficiency. Always check the owner's manual for confirmation.
To improve fuel efficiency, ensure regular maintenance, keep tires inflated to the recommended pressure, use cruise control when possible, minimize the use of air conditioning, and drive smoothly by avoiding rapid acceleration and harsh braking.
The recommended tire pressure for the 2014 Honda Insight is typically 32 psi for both front and rear tires. However, always refer to the placard on the driver's side door jamb for precise information.
To replace the cabin air filter, open the glove box and remove the support arm on the right side. Press in on both sides of the glove box to lower it completely. The cabin air filter is located behind a cover, which you can remove by pressing the tabs. Replace the old filter with a new one and reassemble.
It is generally recommended to change the transmission fluid every 30,000 to 60,000 miles. Always refer to the owner's manual for the manufacturer's specific recommendation.
If your Honda Insight won't start, check the battery connections and ensure they are clean and tight. Verify that the battery has enough charge. If the battery is fine, examine the fuses and ignition system. If the issue persists, it may require professional diagnostics.
If the check engine light comes on, check for any loose gas cap, as this is a common cause. If the cap is tight and the light remains on, use an OBD-II scanner to identify the error code. Address the issue based on the code or consult a mechanic for further diagnosis.
To pair your phone, ensure Bluetooth is active on your device. Press the "Phone" button on the Insight's audio system and select "Yes" to add a new device. Choose your phone from the system's list and confirm the pairing code on both devices.
Common causes of poor acceleration include a clogged air filter, dirty fuel injectors, or a malfunctioning oxygen sensor. Regular maintenance and diagnostics can help identify and resolve these issues.