Honda Insight 2000 Owner's Manual
![Honda Insight 2000 manual cover](/images/7f41197106f7baa6e99ac921/thumbs/thumb175x175.webp)
To reset the maintenance required light, turn off the ignition, press and hold the trip meter reset button, then turn the ignition to the 'ON' position without starting the engine. Hold the button until the light turns off.
Honda recommends using 0W-20 synthetic oil for optimal performance and fuel efficiency in the 2000 Insight.
Common reasons include a failing IMA battery, issues with the charging system, or a faulty DC-DC converter. A diagnostic check is recommended to pinpoint the issue.
The air filter should generally be replaced every 15,000 to 30,000 miles, but it's best to check it every 10,000 miles for signs of dirt and wear.
The recommended tire pressure for the 2000 Honda Insight is 32 psi for the front tires and 30 psi for the rear tires.
To check the transmission fluid, warm up the engine, turn it off, and remove the transmission dipstick. Wipe it clean, reinsert it, then remove it again to check the level. The fluid should be between the upper and lower marks.
Potential causes include a coolant leak, a malfunctioning thermostat, a damaged radiator, or a failing water pump. Check these components for issues.
To replace the headlight bulb, open the hood, disconnect the power connector from the bulb, remove the rubber weather seal, then unclip and remove the old bulb. Insert the new bulb without touching the glass, then reconnect everything.
Rattling noises can be caused by loose components, such as heat shields or exhaust parts, or by internal engine issues like valve clearance problems. A thorough inspection is advised.
Maintain proper tire pressure, perform regular maintenance like oil changes and air filter replacements, reduce excess weight, and drive at steady speeds to improve fuel efficiency.