Honda CRF450R 2018 Manual
![Honda CRF450R 2018 Motorcycle manual cover](/images/mznWBjUFGfwVgdmDPEHRDIzY/thumbs/thumb175x175.webp)
The recommended oil type for a 2018 Honda CRF450R is 10W-30 or 10W-40, and the oil capacity is approximately 1.15 liters (1.21 US qt) when changing the oil and filter.
The air filter on a Honda CRF450R should be cleaned every 6 hours of operation in dusty conditions, or more frequently if necessary.
The valve clearance for the 2018 Honda CRF450R should be adjusted to 0.16 mm (0.006 in) for the intake and 0.28 mm (0.011 in) for the exhaust.
To adjust the suspension for trail riding, soften the compression damping and rebound damping on both the front forks and rear shock to provide a more comfortable ride over rough terrain.
To change the spark plug, remove the seat and fuel tank, disconnect the spark plug cap, and use a spark plug socket to remove and replace the plug. Ensure the new spark plug is torqued to 13 lb-ft (18 Nm).
If your CRF450R is having starting issues, check the battery charge, inspect the spark plug, and ensure the fuel is fresh. Also, confirm that the engine stop switch is in the 'Run' position.
Signs that the clutch may need adjustment or replacement include difficulty in shifting gears, a slipping clutch, or a clutch lever that feels too loose or tight.
Regularly clean the chain with a non-corrosive solvent and apply chain lubricant. Adjust the chain slack to 30-40 mm (1.2-1.6 inches) to ensure proper tension.
If your CRF450R overheats, stop the engine and allow it to cool. Check the coolant level and ensure there are no leaks. Also, verify that the radiator is clean and not obstructed.
Brake pads should be inspected regularly and replaced when the pad thickness is less than 1 mm (0.04 inches) or if you notice reduced braking performance.