Honda CRF250R 2020 Manual

For optimal performance, it's recommended to change the oil every 15 hours of riding or after every 3 races, whichever comes first. Regular oil changes help maintain engine health.
The Honda CRF250R 2020 requires unleaded gasoline with a pump octane number of 91 or higher to ensure proper engine performance and longevity.
Adjust the suspension by first setting the sag according to your weight. Then, fine-tune the compression and rebound damping to suit your riding style and terrain conditions. Consult the owner's manual for detailed instructions.
First, check the fuel level and ensure the fuel valve is open. Verify the kill switch is in the 'Run' position and the battery is charged. Inspect the spark plug for wear or fouling and replace if necessary.
Clean the air filter after every race or every 2-3 rides in dusty conditions. A clean air filter is crucial for optimal engine performance and longevity.
The recommended tire pressure for the CRF250R is 12 psi for the front tire and 12 psi for the rear tire. Adjust according to track conditions and rider preference.
Ensure the brake pads and discs are in good condition and replace them if worn. Bleed the brake lines to remove air bubbles and use high-quality brake fluid. Adjust the brake lever for comfortable reach.
Clean the motorcycle thoroughly, lubricate moving parts, drain the fuel system, and disconnect the battery. Store in a cool, dry place, and cover with a breathable fabric to prevent dust accumulation.
To check the coolant level, ensure the bike is on a level surface and the engine is cool. Remove the radiator cap and verify that the coolant is up to the neck of the radiator. Top up if necessary with the recommended coolant.
The recommended spark plug for the CRF250R 2020 is the NGK LMAR9A-9. Ensure the gap is set correctly to 0.9 mm before installation.