Honda CRF250L 2015 Operation Guide

The recommended oil type for the Honda CRF250L 2015 is 10W-30 or 10W-40, and the oil capacity is approximately 1.6 liters (1.7 US quarts) when changing the oil filter.
It is advisable to inspect the air filter every 1,000 miles (1,600 km) and clean or replace it as necessary, especially if riding in dusty conditions.
The recommended tire pressure for the CRF250L 2015 is 22 psi (150 kPa) for the front tire and 25 psi (175 kPa) for the rear tire.
To adjust the chain tension, loosen the axle nut, adjust the chain adjusters on both sides to achieve 1.2-1.6 inches (30-40 mm) of slack, and then retighten the axle nut to the specified torque.
Valve clearance should be checked and adjusted if necessary every 16,000 miles (25,600 km).
If the CRF250L 2015 has starting issues, check the battery voltage, inspect the spark plug, ensure the fuel valve is open, and examine the fuel system for blockages.
Before storing, clean the motorcycle thoroughly, change the oil, add a fuel stabilizer, disconnect the battery, and cover it to protect from dust and moisture.
To replace the brake pads, remove the caliper, pull out the old pads, compress the caliper pistons, and install new pads. Ensure everything is secured and test the brakes before riding.
Use a high-quality ethylene glycol-based coolant specifically made for aluminum engines in a 50/50 mix with distilled water.
It is recommended to inspect and clean the spark plug every 8,000 miles (12,800 km) and replace it every 16,000 miles (25,600 km) or as necessary.