Honda CRF110F 2013 Manual
![Honda CRF110F 2013 Motorcycle manual cover](/images/IkCONymBWNbyKkJkyttoQXNH/thumbs/thumb175x175.webp)
For the Honda CRF110F 2013, it is recommended to use SAE 10W-30 motorcycle oil that meets or exceeds the API classification of SG or higher.
It is recommended to change the oil every 600 miles or every 6 months, whichever comes first, to ensure optimal engine performance and longevity.
The recommended tire pressure for the Honda CRF110F 2013 is 15 psi for both the front and rear tires.
To adjust the chain tension, first loosen the axle nut, then adjust the chain adjusters on both sides of the swingarm until proper tension is achieved, which is about 1 inch of slack in the chain.
If your Honda CRF110F 2013 won't start, check the fuel level, ensure the kill switch is in the run position, inspect the spark plug for fouling, and verify that the battery is charged.
To clean the air filter, remove the seat and filter cover, take out the air filter, wash it in warm soapy water, rinse thoroughly, dry it, and re-oil before reinstalling.
The spark plug gap for the Honda CRF110F 2013 should be set to 0.6-0.7 mm (0.024-0.028 inches).
To store your Honda CRF110F 2013 for winter, clean the bike thoroughly, change the oil, fill the fuel tank and add a fuel stabilizer, disconnect the battery, and store it in a cool, dry place.
To adjust the idle speed, locate the idle adjustment screw on the carburetor and turn it clockwise to increase the idle speed or counterclockwise to decrease it until the desired RPM is reached.
The Honda CRF110F 2013 is designed to run on unleaded gasoline with a pump octane number of 86 or higher.