Honda CR-V 2006 Owner's Manual
![Honda CR-V 2006 manual cover](/images/59230ce785d746f5e88c6a04/thumbs/thumb175x175.webp)
The recommended oil type for a Honda CR-V 2006 is 5W-20. Using the correct oil type helps maintain engine efficiency and longevity.
To reset the maintenance required light, turn the ignition switch to the ON position without starting the engine, press the trip/reset button until the light turns off, and then turn the ignition off.
The towing capacity of a Honda CR-V 2006 is 1,500 pounds. It's important to not exceed this limit to avoid damaging the vehicle.
The timing belt on a Honda CR-V 2006 should be replaced every 60,000 to 100,000 miles. Regular inspection is recommended to avoid potential engine damage.
Vibration while driving could be caused by unbalanced tires, worn suspension components, or engine issues. It's advisable to have a mechanic inspect the vehicle for a precise diagnosis.
To replace the headlight bulb, open the hood, disconnect the power connector from the bulb, remove the rubber weather seal, unclip the retaining spring, and replace the old bulb with a new one.
Overheating could be due to a low coolant level, a faulty thermostat, or a failing radiator. Check the coolant level and inspect these components for any signs of malfunction.
The recommended tire pressure for a Honda CR-V 2006 is 30 PSI for both front and rear tires. Maintaining proper tire pressure ensures optimal handling and fuel efficiency.
First, check the fuse and the window switch for any faults. If these are functioning properly, the window motor or regulator may need replacement. Consult a professional mechanic if necessary.
The suitable transmission fluid for a Honda CR-V 2006 is Honda ATF-Z1 (automatic transmission fluid). Using the correct fluid type ensures smooth transmission performance.