Honda CMX250C Rebel 300 2014 Operation Guide
![Honda CMX250C Rebel 300 2014 Motorcycle manual cover](/images/VjIxyxoxZYdiOxTuzYfrvtAx/thumbs/thumb175x175.webp)
To break in your Honda CMX250C Rebel 300, avoid full throttle starts and rapid acceleration for the first 300 miles. Keep engine speed below 5,000 RPM and vary your speed. After the initial break-in period, gradually increase the engine speed and use the full throttle range.
The recommended oil type is SAE 10W-30, API classification SG or higher. Change the oil every 4,000 miles or every 6 months, whichever comes first.
Check the battery connections and charge level. Ensure the fuel valve is on and that there is sufficient fuel. Inspect the spark plugs for wear or fouling. If the problem persists, consult a professional mechanic.
The recommended tire pressure is 29 psi for the front tire and 33 psi for the rear tire. Always check tire pressure when the tires are cold.
Clean and lubricate the chain every 600 miles. Use a suitable chain cleaner and lubricant. Check the tension regularly, ensuring it has about 1 inch of slack at the tightest point.
Replace the air filter every 12,000 miles or more frequently if you ride in dusty conditions. A clean air filter ensures optimal engine performance and fuel efficiency.
To adjust the clutch, locate the adjuster at the clutch lever. Loosen the locknut and turn the adjuster until there is about 10-20 mm of free play at the lever. Tighten the locknut after adjusting.
Maintain proper tire pressure, perform regular maintenance, and avoid rapid acceleration. Riding at a steady speed and reducing idling time can also improve fuel efficiency.
If the motorcycle overheats, stop in a safe location and turn off the engine. Allow it to cool down before checking the coolant level. Refill if necessary and inspect the cooling system for leaks or obstructions.
To replace the spark plugs, remove the spark plug cap and use a spark plug wrench to unscrew the old plug. Install a new plug by hand to avoid cross-threading, then tighten with the wrench. Reattach the spark plug cap.