Honda Civic Coupe 2018 Owner's Manual

To reset the maintenance light, turn on the ignition without starting the engine. Press the "Trip" button until the "Engine Oil Life" is displayed. Hold down the "Trip" button until the oil life starts to blink. Release the button, then hold it again until the oil life resets to 100%.
The 2018 Honda Civic Coupe typically requires 0W-20 synthetic oil, which provides optimal performance and fuel efficiency. Always check the owner's manual or consult a professional for confirmation.
It is generally recommended to change the transmission fluid every 30,000 to 60,000 miles. Refer to the owner's manual for the specific service interval suitable for your driving conditions.
The recommended tire pressure for the 2018 Honda Civic Coupe is typically 32 psi for both front and rear tires. Always verify with the sticker located on the driver's side door jamb.
To improve fuel efficiency, maintain proper tire pressure, remove excess weight, use cruise control when possible, and adhere to regular maintenance schedules. Driving smoothly and avoiding rapid acceleration can also help.
If the AC is not blowing cold air, check the refrigerant level, inspect for leaks, ensure the AC compressor is functioning, and examine the cabin air filter for clogs. Consulting a professional may be necessary if the issue persists.
If the battery continues to die, check for electrical drains, ensure the alternator is charging the battery, inspect the battery terminals for corrosion, and verify the battery's age and health. Replacing the battery may be necessary if it's old or faulty.
To pair your phone, turn on your phone's Bluetooth. On the Civic's display, go to "Settings," then "Bluetooth." Select "Add Bluetooth Device," and choose your phone from the list. Confirm the pairing code on both devices to complete the process.
The 2018 Honda Civic Coupe is not designed for heavy towing. It can handle small loads, like a bike rack or light trailer, but always confirm the weight limits in the owner's manual to ensure safety.
To replace the headlight bulb, open the hood and locate the back of the headlight assembly. Disconnect the power connector, remove the rubber weather seal, and unclip the bulb. Replace with a new bulb, reattach the clip, seal, and connector. Ensure the bulb is securely in place before closing the hood.