Honda CBR1000RA 2018 Operation Guide

Honda CBR1000RA 2018 Motorcycle manual cover

Pages 235

Year 2018

Language(s)

of 235

Honda CBR1000RA 2018 Motorcycle Specification

The 2018 Honda CBR1000RA, also known as the CBR1000RR Fireblade, is a high-performance sport motorcycle designed for precision handling and extreme power. It features a 999cc liquid-cooled inline four-cylinder engine, delivering approximately 189 horsepower at 13,000 rpm and 114 Nm of torque at 11,000 rpm. The engine incorporates Honda’s Dual Stage Fuel Injection (PGM-DSFI) system, optimizing fuel delivery for both low and high RPM ranges.

The CBR1000RA is equipped with a six-speed transmission and a slipper clutch, enhancing control during aggressive downshifts and rapid acceleration. Its aluminum composite twin-spar frame is complemented by a fully adjustable 43mm Showa Big Piston Fork (BPF) at the front and a fully adjustable Showa Balance Free Rear Cushion (BFRC) shock at the rear, providing exceptional stability and handling dynamics.

Braking performance is ensured by dual 320mm front discs with radial-mount four-piston calipers and a single 220mm rear disc. The inclusion of ABS (Anti-lock Braking System) provides additional safety and control during emergency braking situations. The motorcycle features a lightweight design, with a wet weight of approximately 196 kg (432 lbs), contributing to its agile and responsive handling.

The CBR1000RA integrates advanced electronics, including a full-color TFT display, selectable riding modes, Honda Selectable Torque Control (HSTC), and an electronic steering damper. These systems offer riders customizable settings to suit various riding conditions and preferences. The aerodynamic bodywork not only enhances the bike’s aesthetics but also improves airflow and stability at high speeds.

Overall, the 2018 Honda CBR1000RA combines cutting-edge technology, powerful performance, and refined handling characteristics, making it a standout choice for sport motorcycle enthusiasts.

Honda CBR1000RA 2018 Motorcycle F.A.Q.

How do I change the oil on a Honda CBR1000RA 2018?

To change the oil on your Honda CBR1000RA 2018, first warm up the engine to ensure the oil flows out smoothly. Place the bike on a stand and remove the lower fairing if necessary. Unscrew the oil drain plug and let the oil drain completely. Replace the drain plug and remove the oil filter. Install a new filter, then refill with the recommended oil grade to the proper level as indicated in the owner's manual.

What is the recommended tire pressure for the Honda CBR1000RA 2018?

The recommended tire pressure for the Honda CBR1000RA 2018 is typically 36 psi for the front tire and 42 psi for the rear tire. Always refer to the owner's manual or the sticker on the motorcycle for the most accurate specifications.

How often should I replace the air filter on my Honda CBR1000RA 2018?

It is recommended to inspect the air filter every 12,000 miles or 19,000 kilometers and replace it as necessary. Riding in dusty or polluted environments may require more frequent replacements.

Why does my Honda CBR1000RA 2018 engine overheat?

Engine overheating can be caused by several factors including low coolant levels, a faulty thermostat, radiator issues, or a malfunctioning fan. It's important to check these components and ensure proper maintenance to avoid overheating.

What type of coolant should I use for the Honda CBR1000RA 2018?

Use a high-quality ethylene glycol-based coolant that is specifically formulated for aluminum engines. Ensure it is mixed with distilled water at a 50/50 ratio unless specified otherwise in the owner's manual.

How do I adjust the chain tension on my Honda CBR1000RA 2018?

To adjust the chain tension, place the motorcycle on a stand and measure the slack in the chain at the midpoint between the front and rear sprockets. Loosen the axle nut and adjust the chain tension using the adjusters on either side of the swingarm until the slack is within the recommended range, usually around 1 to 1.5 inches. Tighten the axle nut securely after adjustment.

What should I do if my Honda CBR1000RA 2018 won't start?

If your Honda CBR1000RA 2018 won't start, check the battery connections, ensure the kill switch is in the run position, and verify there is enough fuel. If the problem persists, inspect the spark plugs and fuses, and consider consulting a professional mechanic.

How do I maintain the brakes on my Honda CBR1000RA 2018?

Regularly inspect the brake pads for wear and replace them if necessary. Check the brake fluid level and top it up with the recommended type if needed. Ensure there are no leaks in the brake lines and that the brake lever and pedal operate smoothly.

What is the service interval for the Honda CBR1000RA 2018?

The service interval for the Honda CBR1000RA 2018 is generally every 8,000 miles or 12,800 kilometers. This includes oil changes, checking valve clearances, and inspecting other critical components. Always refer to the service manual for detailed maintenance schedules.

How do I properly store my Honda CBR1000RA 2018 for the winter?

To store your Honda CBR1000RA 2018 for the winter, clean the bike thoroughly and apply a coat of wax to protect the paint. Fill the fuel tank and add a fuel stabilizer. Change the oil and check all fluids. Disconnect the battery and store it in a cool, dry place. Cover the motorcycle with a breathable cover and store it in a sheltered area away from moisture.