Honda CB500X 2018 Operation Guide
![Honda CB500X 2018 Motorcycle manual cover](/images/XgtponnMRRpnhyCCGvCJIwKH/thumbs/thumb175x175.webp)
The recommended oil type for the Honda CB500X 2018 is SAE 10W-30, JASO T 903 standard MA, or higher.
It is recommended to change the oil every 8,000 miles or 12,800 kilometers, or at least once a year. However, more frequent changes might be necessary under severe use conditions.
Use a high-quality ethylene glycol antifreeze that is specifically formulated for aluminum engines, mixed with distilled water in a 50/50 ratio.
If the bike fails to start, check the battery charge, inspect the fuel level, ensure the kill switch is in the 'run' position, and check the starter button connections.
The recommended tire pressure is 36 psi for the front tire and 42 psi for the rear tire.
To adjust the chain tension, place the bike on a center stand, loosen the rear axle nut, adjust the tensioning bolts evenly on both sides, and ensure there is 1-1.5 inches of slack in the chain. Tighten the axle nut after adjustment.
Regular maintenance tasks include oil and filter changes, checking the chain tension, inspecting brakes and tire pressure, and verifying that all lights and signals work properly.
To improve fuel efficiency, ensure the tire pressures are correct, the chain is properly lubricated, and avoid aggressive acceleration. Regular maintenance also helps maintain optimal fuel efficiency.
If the bike overheats, stop riding immediately to let the engine cool down. Check the coolant level and ensure the radiator is not blocked. If the problem persists, consult a professional mechanic.
To replace the air filter, remove the seat and side panels, unscrew the air filter cover, remove the old filter, and install the new one. Ensure it is seated properly before reassembling the components.