Honda CB1000RA 2022 Manual

The recommended tire pressure for the Honda CB1000RA 2022 is 36 psi for the front tire and 42 psi for the rear tire.
It is recommended to change the oil every 4,000 miles or every 6 months, whichever comes first. Always use high-quality oil as specified in the owner's manual.
Use a high-quality ethylene glycol-based non-silicate, non-borate coolant specifically formulated for aluminum engines.
To adjust the chain tension, place the motorcycle on a stand, loosen the axle nut, adjust the chain tensioners evenly on both sides, and retighten the axle nut to the specified torque.
To replace the air filter, remove the seat, unscrew the air filter cover, remove the old air filter, and replace it with a new one. Ensure the new filter is seated properly before reassembling.
If the bike won't start, check the battery charge, inspect the fuses, ensure the kill switch is in the correct position, and verify the fuel level. If the problem persists, consider consulting a professional mechanic.
If the motorcycle overheats, safely pull over and turn off the engine. Allow it to cool down before checking the coolant level and inspecting for leaks. Avoid riding until the issue is resolved.
Regularly inspect the brake pads for wear, check the brake fluid level, and ensure the brake lines are free from leaks. Replace worn brake pads and flush the brake fluid every two years.
For winter storage, clean the bike thoroughly, stabilize the fuel, disconnect the battery, and store the motorcycle in a dry place. Cover it with a breathable fabric to protect it from dust and moisture.
To improve fuel efficiency, maintain regular service intervals, keep tires properly inflated, avoid aggressive acceleration, and use high-quality fuel.