Honda Africa Twin CRF1000A 2017 Operation Guide
![Honda Africa Twin CRF1000A 2017 Motorcycle manual cover](/images/xhHuUTazkfhUTbipZAUNcxAj/thumbs/thumb175x175.webp)
The recommended oil type for the Honda Africa Twin CRF1000A 2017 is SAE 10W-30, API classification SG or higher, JASO T 903 standard MA.
To adjust the chain tension, place the bike on the center stand, measure the slack in the middle of the chain, and adjust the rear axle position accordingly to achieve a slack of 35-45mm.
The recommended tire pressure is 29 psi (200 kPa) for the front tire and 33 psi (230 kPa) for the rear tire when riding solo. Adjust as needed for additional load or riding conditions.
The air filter should be inspected every 12,000 miles (19,200 km) and replaced as necessary, depending on riding conditions. Replace it more frequently in dusty or dirty environments.
Check the battery charge and connections, ensure the kill switch is off, verify fuel levels, inspect fuses, and ensure the side stand is up and the bike is in neutral.
To reset the service light, press and hold the select and reset buttons on the dash while turning the ignition on, then release the buttons after the service light blinks.
The valve clearance for the Africa Twin CRF1000A 2017 should be 0.16-0.20mm for the intake and 0.28-0.32mm for the exhaust. Regularly check and adjust as needed.
To improve fuel efficiency, maintain proper tire pressure, use recommended oil, avoid excessive idling, and ride at a consistent speed. Regular maintenance also helps.
Common issues include DCT problems, electrical faults, and stalling. Regular software updates, thorough inspections, and addressing recalls can mitigate these issues.
Clean and dry the motorcycle, add a fuel stabilizer, change the oil, remove the battery, and store in a cool, dry place. Cover the bike to protect it from dust and moisture.