Honda ADV150A 2022 Manual

To break in your Honda ADV150A 2022 scooter, avoid full-throttle starts and rapid acceleration for the first 300 miles. Gradually increase your speed and vary the engine load to ensure optimal engine performance.
Use SAE 10W-30, JASO T 903 standard MA, or higher quality oil. Change the oil every 4,000 miles or 6 months, whichever comes first, to maintain engine longevity.
To improve fuel efficiency, maintain proper tire pressure, perform regular maintenance, avoid excessive idling, and accelerate smoothly.
Check the battery connections, ensure the kill switch is in the 'Run' position, verify fuel levels, and inspect the spark plug for wear or damage.
Replace the air filter every 12,000 miles or 24 months, whichever comes first, to ensure proper airflow and engine performance.
The recommended tire pressure for the Honda ADV150A 2022 is 29 psi for the front tire and 33 psi for the rear tire.
To adjust the headlight beam, locate the adjustment screw near the headlight assembly. Turn the screw clockwise to raise the beam and counterclockwise to lower it.
If the ABS warning light remains on, check the ABS sensor connections for any visible issues. If the problem persists, consult a Honda dealer for a diagnostic check.
Check the coolant level every 6,000 miles or 12 months. Ensure the scooter is on a level surface and the engine is cool. Remove the radiator cap and verify the coolant is at the appropriate level.
Inspect the brake pads for wear or debris. Clean the rotor and pads with a brake cleaner. If the squeak persists, consider replacing the pads or consult a professional.