Honda Accord Sedan 2014 Owner's Manual
![Honda Accord Sedan 2014 manual cover](/images/af381873365aef6f95567b5b/thumbs/thumb175x175.webp)
To reset the TPMS, first ensure all tires are properly inflated. Turn the ignition to the 'ON' position, but do not start the engine. Press and hold the TPMS button located under the dashboard on the left until the TPMS indicator blinks twice.
The 2014 Honda Accord Sedan typically requires 0W-20 synthetic oil for optimal performance and fuel efficiency. Always check the owner's manual to confirm the specific oil requirements for your vehicle.
To pair your smartphone, enable Bluetooth on your phone. On the car's audio system, select 'Phone' then 'Add Bluetooth Device'. Follow the on-screen instructions and select 'HandsFreeLink' from your phone’s Bluetooth menu. Enter the provided code if necessary.
Honda recommends an oil change every 7,500 miles or 12 months, tire rotation every 7,500 miles, and a comprehensive inspection every 15,000 miles. Refer to the owner's manual for a detailed maintenance schedule.
Open the glove box and remove the dampener arm. Push the sides of the glove box inward to release it. Locate the cabin air filter cover, unclip it, and remove the old filter. Insert the new filter, ensuring the airflow direction is correct, then reassemble.
The check engine light can illuminate for various reasons, such as a loose gas cap, faulty oxygen sensor, or engine misfire. Use an OBD-II scanner to retrieve the error code, then consult a professional mechanic for further diagnosis.
To jump-start, connect the positive cable to the positive terminal of the dead battery, then to the positive terminal of the donor battery. Connect the negative cable to the negative terminal of the donor battery and the other end to an unpainted metal surface on the Accord. Start the donor vehicle, then the Accord.
Warm up the vehicle by driving several miles. Park on a level surface and turn off the engine. Locate the transmission dipstick, remove it, wipe it clean, reinsert it fully, then remove it again to check the fluid level. Add fluid if the level is low.
To replace the key fob battery, remove the screw on the back of the fob, then pry it open. Remove the old battery and insert a new CR2032 battery with the positive side facing up. Reassemble the fob and test it to ensure functionality.
Park the vehicle on a level surface facing a wall 25 feet away. Open the hood and locate the headlight adjustment screws. Adjust the screws to align the headlights, ensuring the beam is centered on the wall at the same height as the headlight.