Hero Xtreme 200S 2020 Owner's Manual

The recommended engine oil for the Hero Xtreme 200S 2020 is SAE 10W30 SL grade, which is ideal for enhancing performance and longevity of the engine.
It is advisable to service your Hero Xtreme 200S 2020 every 3,000 to 4,000 kilometers or every 6 months, whichever comes first, to ensure optimal performance and longevity.
To adjust the chain tension, first loosen the rear axle nut, then use the adjuster bolts on either side to set the correct tension. Ensure there is about 20-30 mm of slack at the midpoint of the chain before tightening the axle nut.
If your Hero Xtreme 200S 2020 is experiencing starting issues, check the battery charge, ensure the fuel supply is adequate, inspect the spark plug for wear or fouling, and verify the kill switch is in the correct position.
The recommended tire pressure for the Hero Xtreme 200S 2020 is 29 psi for the front tire and 33 psi for the rear tire.
Regularly check brake pad wear and replace them if they are less than 2.0 mm thick. Also, ensure the brake fluid level is between the minimum and maximum marks on the reservoir.
If the bike overheats, stop riding immediately and allow the engine to cool. Check the coolant level and inspect for any leaks or blockages in the cooling system. If the problem persists, consult a qualified technician.
To improve fuel efficiency, ensure regular maintenance, keep the tires properly inflated, avoid aggressive acceleration and braking, and use quality fuel.
The correct idle RPM for the Hero Xtreme 200S 2020 is approximately 1,400 ± 100 RPM. Use the idle adjustment screw on the carburetor/throttle body to make adjustments if necessary.
To clean the air filter, remove it from the housing, wash it with a mild detergent, rinse thoroughly, and let it dry completely. Apply a small amount of air filter oil before reinstalling. Replace the filter if it is damaged or excessively dirty.