Hero Xtreme 200 2018 Owner's Manual
![Hero Xtreme 200 2018 Motorcycle manual cover](/images/gbjjNKVKXZzpHuTvJvUyTeap/thumbs/thumb175x175.webp)
The recommended engine oil for the Hero Xtreme 200 2018 is SAE 10W30 grade, API SL, or JASO MA certified.
It is advisable to change the engine oil every 3,000 kilometers or as recommended in the owner's manual, whichever comes first.
The recommended tire pressure for the Hero Xtreme 200 2018 is 29 psi for the front tire and 33 psi for the rear tire.
To adjust the chain tension, loosen the axle nut, adjust the chain adjusters evenly on both sides until the correct tension is achieved, and then retighten the axle nut. The chain should have about 25-30mm of slack.
If your bike won't start, check the battery charge, ensure there is fuel, inspect the spark plug, and verify that the kill switch is in the 'run' position. If the issue persists, consult a professional mechanic.
To replace the air filter, remove the seat, unscrew the air filter box cover, take out the old filter, and insert the new one. Ensure the new filter is properly seated before reassembling.
The spark plug should be inspected every 6,000 kilometers and replaced if necessary, or as recommended in the owner's manual.
The Hero Xtreme 200 2018 is designed to run on unleaded petrol with an octane rating of 91 or higher.
To improve fuel efficiency, maintain proper tire pressure, perform regular maintenance, avoid aggressive acceleration, and ride at a steady speed.
The service interval for the Hero Xtreme 200 2018 is typically every 3,000 kilometers or six months, whichever comes first. Refer to the owner's manual for detailed schedule and service tasks.