Hero Super Splendor Xtec 2023 Owner's Manual
![Hero Super Splendor Xtec 2023 Motorcycle manual cover](/images/csFzOYvHgwMcGRLliVHkdppj/thumbs/thumb175x175.webp)
To check the engine oil level, place the motorcycle on a level surface and ensure the engine is cool. Remove the dipstick, wipe it clean, reinsert it without screwing, and then remove it again to check the oil level. The oil should be between the minimum and maximum marks on the dipstick.
The Hero Super Splendor Xtec 2023 is designed to run on unleaded petrol with an octane rating of 91 or higher. Using the recommended fuel type ensures optimal performance and efficiency.
It is recommended to have your Hero Super Splendor Xtec 2023 serviced every 3,000 kilometers or every three months, whichever comes first. Regular servicing helps maintain the motorcycle's performance and longevity.
If the battery is not charging, check the battery connections for any loose or corroded terminals. Ensure the alternator is functioning correctly. If the problem persists, it is advisable to consult an authorized service center.
To adjust the chain tension, place the motorcycle on its main stand. Loosen the rear axle nut and adjust the chain tensioner bolts on either side of the swingarm until the chain has approximately 25-30 mm of slack. Tighten the axle nut securely.
The recommended tire pressure for the Hero Super Splendor Xtec 2023 is 25 PSI for the front tire and 28 PSI for the rear tire. Maintaining proper tire pressure ensures better handling and fuel efficiency.
To improve fuel efficiency, maintain a steady speed, avoid rapid acceleration and hard braking, keep the tires properly inflated, and ensure regular maintenance, including timely oil changes and air filter cleaning.
Frequent stalling could be due to a clogged air filter, incorrect idle speed, or fuel system issues. Check and clean the air filter, adjust the idle speed if necessary, and ensure there are no blockages in the fuel system. If the issue persists, consult a professional mechanic.
To replace a headlight bulb, first switch off the ignition and disconnect the battery. Remove the headlight cover, detach the wiring connector from the bulb, and remove the old bulb. Insert a new bulb, reattach the wiring connector, and replace the headlight cover.
The break-in period for the Hero Super Splendor Xtec 2023 is the first 1,000 kilometers. During this time, avoid high speeds, vary the engine RPM, and refrain from full-throttle acceleration to ensure the engine components settle properly.