Hero Splendor iSmart Plus 2018 Owner's Manual

To check the engine oil level, place the motorcycle on a flat surface and ensure it is upright. Remove the dipstick, wipe it clean, insert it back without screwing it, and then remove it again to check the oil level. It should be between the minimum and maximum marks.
The recommended tire pressure for the Hero Splendor iSmart Plus 2018 is 25 psi for the front tire and 35 psi for the rear tire. Ensure to check the tire pressure when the tires are cold for accurate readings.
It is recommended to change the engine oil every 3,000 to 4,000 kilometers or every 6 months, whichever comes first, to ensure optimal performance and engine longevity.
The recommended spark plug for the Hero Splendor iSmart Plus 2018 is the NGK CR7HSA or an equivalent. Regularly check and replace the spark plug every 12,000 kilometers for optimal performance.
To improve fuel efficiency, maintain proper tire pressure, regularly service the motorcycle as per the schedule, use the recommended grade of engine oil, and avoid aggressive acceleration and braking.
If the battery is not charging, check the connections for corrosion or loose terminals. Ensure the alternator is functioning properly. If issues persist, it may be necessary to replace the battery or consult a professional mechanic.
To adjust the chain tension, loosen the axle nut, adjust the chain tensioners on each side of the swingarm evenly, and ensure the slack is within the recommended range (20-30mm). Tighten the axle nut securely after adjustment.
To clean your motorcycle, use a gentle motorcycle-specific cleaner and a soft cloth or sponge. Avoid high-pressure water jets. Dry the motorcycle thoroughly to prevent rust and apply a wax or polish for protection.
If the motorcycle won't start, check the fuel level, battery charge, and spark plug condition. Ensure the engine kill switch is in the 'Run' position. If problems persist, consult with a mechanic.
Regular maintenance includes oil changes, air filter cleaning/replacement, spark plug inspection, chain lubrication and tension adjustment, brake system checks, and ensuring all nuts and bolts are tightened.