Hero Pleasure Plus 2019 Owner's Manual
![Hero Pleasure Plus 2019 Scooter manual cover](/images/uTtsqLZpVjwBXrEukFrfZKje/thumbs/thumb175x175.webp)
To check the engine oil level, place the scooter on a level surface and use the dipstick located near the engine. Unscrew it, wipe it clean, reinsert it without screwing it back in, and then check the oil level on the marked area.
The recommended tire pressure for the Hero Pleasure Plus 2019 is 22 psi for the front tire and 29 psi for the rear tire when riding solo.
First, check the battery connections and ensure they are tight. Verify that the battery is charged. If the issue persists, examine the spark plug and clean or replace if necessary. Lastly, check the fuel supply and ensure there are no blockages.
It is recommended to use unleaded petrol with an octane rating of 91 or higher for optimal performance of the Hero Pleasure Plus 2019.
It is advised to service your Hero Pleasure Plus 2019 every 3,000 kilometers or every 3 months, whichever comes first, to ensure optimal performance and longevity.
If you notice oil leaking, check the oil drain plug and filter for tightness. Inspect the engine gasket and seals for any visible damage. If the issue persists, consult a certified mechanic for a comprehensive inspection.
To adjust the brakes, locate the brake adjuster nuts near the wheel hubs. For the front brake, turn the adjuster nut on the lever clockwise to tighten. For the rear brake, adjust the nut on the rear wheel hub. Test the brakes after adjustment to ensure proper function.
Signs that your scooter may need a new spark plug include difficulty starting, poor fuel economy, misfiring, and reduced acceleration. A visual inspection may reveal a worn or fouled plug.
To clean the air filter, remove the air filter cover, take out the filter, and gently clean it with compressed air or wash it with a mild detergent if it's a washable type. Ensure it is completely dry before reinstalling.
First, check the bulb to see if it needs replacement. If the bulb is fine, inspect the fuse and replace it if blown. Additionally, ensure that the wiring connections are secure and not damaged.