Hero Maestro 2014 Owner's Manual

To check the engine oil level, place the scooter on its center stand on a level surface. Locate the dipstick near the engine, unscrew it, wipe it clean, reinsert it without screwing, and then remove it to check the oil level. The oil should be between the 'MIN' and 'MAX' marks.
If the scooter doesn't start, first check the fuel level and ensure the kill switch is in the 'RUN' position. Verify the battery connection and charge level. Inspect the spark plug for wear or damage. If the scooter still doesn't start, consider seeking professional mechanical assistance.
It's recommended to inspect the air filter every 2000 km and clean or replace it every 12,000 km or as needed, especially if you ride in dusty conditions.
The Hero Maestro 2014 scooter is designed to run on unleaded petrol with an octane rating of 91 or higher.
To improve fuel efficiency, ensure regular maintenance, keep tires properly inflated, avoid aggressive acceleration and braking, and shut off the engine during prolonged stops.
The recommended tire pressure for the Hero Maestro 2014 is 22 psi for the front tire and 30 psi for the rear tire. Always check the tire pressure when the tires are cold.
To adjust the headlight beam, locate the adjustment screws near the headlight assembly. Turn them clockwise or counterclockwise to raise or lower the beam as needed for optimal visibility.
If the brakes feel spongy, check the brake fluid level and inspect for leaks in the brake lines. Bleeding the brake system may be necessary to remove air bubbles. If issues persist, consult a mechanic.
To change the spark plug, first remove the scooter's side panel to access the engine. Disconnect the spark plug wire, use a spark plug socket to unscrew the old plug, and insert the new one. Reconnect the wire and reattach the panel.
During the first service, typically at 500 km, check and adjust the engine oil, inspect the brakes, tighten nuts and bolts, check the battery, lubricate moving parts, and inspect the electrical system.