Hero Ignitor 2012 Owner's Manual
![Hero Ignitor 2012 Motorcycle manual cover](/images/gXTzNiPTsKOOjRndpNcYgwtu/thumbs/thumb175x175.webp)
To improve fuel efficiency, ensure regular maintenance such as timely oil changes, clean air filters, and proper tire inflation. Riding at a constant speed and avoiding sudden acceleration can also help.
Check the battery for sufficient charge and ensure the spark plug is clean and functioning. It may also help to use the choke for a cold start.
It is recommended to change the engine oil every 3000-4000 kilometers or as specified in the owner's manual to ensure optimal engine performance.
Regular checks include inspecting the brakes, tires, chain tension, lights, and fluid levels. Also, ensure that the throttle and clutch cables are lubricated.
To adjust the chain tension, loosen the rear axle nut and adjust the chain adjuster bolts equally on both sides until the appropriate tension is achieved, then retighten the axle nut.
Check the battery voltage and connections. If the battery is fine, inspect the headlight bulb and replace it if necessary. Also, ensure the alternator is charging the battery properly.
Remove the air filter cover, take out the filter, and clean it with compressed air or replace it if it’s too dirty or damaged. Reinstall and secure the cover properly.
Excessive vibration could be due to engine mounting issues, unbalanced tires, or improper chain tension. Inspect these areas and adjust or service as necessary.
DOT 3 or DOT 4 brake fluid is recommended for the Hero Ignitor 2012. Always ensure the brake fluid is at the correct level and replace it as per the maintenance schedule.
If the motorcycle is hard to start, lights are dim, or the battery is more than 2-3 years old, it may be time to replace it. Testing the battery voltage with a multimeter can also indicate its health.