Hero HF-Deluxe Eco 2013 Owner's Manual
![Hero HF-Deluxe Eco 2013 Motorcycle manual cover](/images/UvQOvvsMDIXNoCSCHsQFCCpi/thumbs/thumb175x175.webp)
To perform an oil change, warm up the engine, place the bike on the center stand, remove the drain plug, and allow the oil to completely drain. Replace the drain plug and fill the engine with the recommended oil type and quantity.
The recommended tire pressure for the Hero HF-Deluxe Eco 2013 is 25 psi for the front tire and 28 psi for the rear tire.
Check the battery for charge, ensure the fuel valve is open, inspect the spark plug for wear, and verify that the kill switch is in the 'on' position.
Regular maintenance includes checking and adjusting the chain tension, inspecting brakes, changing the oil every 3000 km, and cleaning the air filter.
Loosen the rear axle nut, adjust the chain tensioner nuts on both sides evenly until the chain has about 20-30 mm of slack, then tighten the axle nut securely.
The recommended spark plug for the Hero HF-Deluxe Eco 2013 is the NGK CR7HSA.
Maintain proper tire pressure, clean the air filter regularly, use the recommended engine oil, and avoid aggressive acceleration and braking.
Remove the air filter cover, take out the filter, wash it with a mild detergent, let it dry completely, and then reinstall it.
Check the brake fluid level, inspect the brake lines for leaks, and bleed the brakes to remove any air from the system.
Brake pads should be inspected every 5000 km and replaced when the thickness is less than 1.5 mm or when they show signs of wear.