Hero GLAMOUR XTEC 2021 Owner's Manual
![Hero GLAMOUR XTEC 2021 Motorcycle manual cover](/images/qamHtUdyrICEQtGwUYfrbciC/thumbs/thumb175x175.webp)
To check the engine oil level, place the motorcycle on a level surface and ensure the engine is off and cool. Remove the dipstick, wipe it clean, insert it back without screwing it in, then remove it again to check the oil level. It should be between the minimum and maximum marks.
The recommended tire pressure for the Hero GLAMOUR XTEC 2021 is 25 psi for the front tire and 30 psi for the rear tire. Always check the tire pressure when the tires are cold for an accurate reading.
To adjust the headlight beam, locate the adjusting screws on the headlight assembly. Turn the screws clockwise or counterclockwise to adjust the vertical and horizontal alignment of the beam as needed. Ensure the motorcycle is on a level surface while making adjustments.
If your motorcycle won't start, check the following: ensure the kill switch is in the 'Run' position, the fuel valve is open, the battery is charged, and the spark plug is functioning. If the problem persists, consult a professional mechanic.
The air filter should be inspected every 3,000 km and cleaned or replaced if necessary. If you ride in dusty conditions, check it more frequently. A clean air filter ensures optimal engine performance and fuel efficiency.
The recommended engine oil for the Hero GLAMOUR XTEC 2021 is SAE 10W-30, API SL grade or higher. Using the correct oil ensures better lubrication, efficiency, and longevity of the engine.
To improve fuel efficiency, maintain optimal tire pressure, perform regular maintenance, use recommended engine oil, avoid aggressive acceleration, and maintain a steady speed. Also, ensure the air filter is clean and the carburetor is tuned properly.
For long-term storage, clean and lubricate the motorcycle, fill the fuel tank and add a fuel stabilizer, disconnect the battery, and cover the bike to protect it from dust and moisture. Store it in a dry, cool place away from direct sunlight.
The break-in period for the Hero GLAMOUR XTEC 2021 is the first 1,000 km. During this time, avoid full-throttle starts, hard braking, and maintaining a constant speed for long periods. Gradually increase speed and engine load to ensure proper break-in.
Check the battery connections for corrosion or looseness, inspect fuses for any that are blown, and ensure all bulbs are functional. If the issue persists, inspect the wiring for damage or consult a professional electrician.